APG DCR-1004 user manual - Manual (Page 42)

DCR-1003 and DCR-1004 Rev. A3, 10/08
42
Automation Products Group, Inc.
APG...Providing tailored solutions for measurement applications
Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • [email protected]
• Maintenance
The DCR-1003, 1004 controller and DST sensor do not require maintenance.
However, a periodic visual inspection of the system would be in order.
The DST should be kept as clean as possible for optimum performance. Dust
buildup may be removed from the transducer with a cloth or by low pressure
air. The DST-PVC can be cleaned with soap and water.
If the DST is visibly effected by the environment, a different type of
transducer may be required.