AMMCO 700 Vehicle Brake Lathe - Manual (Page 8)

2 • AMMCO 700/705/710 Brake Lathes
Brake Lathes
Model 700 Vehicle Mounted Brake Lathe
Model 710 Specifications
Overall Lathe Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-3/8 in. (238 mm)
Overall Lathe Depth . . . . . . . . . . . . . . . . . . . . . . . . . . .12-11/16 in. (322 mm)
Overall Lathe Width . . . . . . . . . . . . . . . . . . . . . . . . . . .11-13/16 in. (300 mm)
Feed Rate (With Rotor Driving Unit Only/180 RPM) . . . . ..0023 in. per rev. (.058 mm/rev.)
Micrometer Graduations . . . . . . . . . . . . . . . . . . . . . ..002 in. (.0508 mm/rev.)
Max. Distance Between Adjustable Mounting Brackets . . . . .8-1/32 in. (204)
Min. Distance BetweenAdjustable Mounting Brackets . . . .1-1/16 in. (27 mm)
Lathe Weight (Lathe Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 lbs. {8.17 kg)
Floor Space . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-3/4 in. wide X 10-1/2 in. deep
(When Stored in Case) . . . . . . . . . . . . . . . . . . . . . . . .(400 mm X 267 mm)
Components
Know Your Unit
Compare this illustration with the unit before placing it into serv-
ice. Maximum performance and safety will be obtained only when
all persons using the unit are fully trained in its parts and operation.
Each user should learn the function and location of all controls.
Prevent accidents and injuries by ensuring the unit is properly
installed, operated, and maintained.