Brother HL-2600CN Series - Manual (Page 76)

CHAPTER 4 CONTROL PANEL OPERATION
4-7
Reprint the last JOB 3 times
1. Use the control panel to turn the REPRINT function ON in SETUP
mode.
Notes
If you are using the driver supplied with the printer, the settings for spooling
jobs in the printer driver will take priority over the settings made using the
control panel. For more information, see
“Job spooling” in Chapter 2 .
2. Press Reprint .
---REPRINT---
COPIES=
1
If you wait too long to continue the control panel operation,
the display will exit the REPRINT menu automatically.
Press + twice.
---REPRINT---
COPIES=
3
Press Set or Reprint.
PRINTING
---REPRINT---
COPIES=
1
Notes
• If you press Go , the printer will exit from the Reprint menu.
•
If you want to reprint the data and have pressed Go , the display will show
“ PRESS SET TO PRINT. ” Press Set to start reprinting, or press Go to
cancel the reprint job.