Brother HL-2600CN Series - Manual (Page 159)

CHAPTER 5 MAINTENANCE
5-47
5. Check the two alignment pins on the
Lower Tray Unit. Use two people to
lift the printer and place it onto the
Lower Tray Unit. Be sure to use the
handholds located at the bottom four
corners of the printer. Check to
ensure that the pins are correctly
aligned into the printer.
Fig. 5-55
6. Remove the connector cover from
the base cover at the left side of the
printer.
Fig. 5-56
7. Loosen the locking clip thumbscrew
on the left side of the Lower Tray Unit
by rotating it counterclockwise.
Rotate the locking clip and hook it
onto the printer so that it hangs
down, and then secure it with the
thumbscrew.
Fig. 5-57