Brother HL-2600CN Series - Manual (Page 123)

CHAPTER 5 MAINTENANCE
5-11
Replacing the Oil Bottle
1. Press the Power button to turn off the printer, and then wait until it has
cooled down sufficiently.
2. Open the Top Cover.
3. Release the Oil Bottle Lock
Levers as shown:
Fig. 5-5
4. Remove the empty Oil Bottle from the Fusing Unit. Hold a sheet of paper
under the Oil Bottle and lift it out of the Fusing Unit. Move the bottle away
from the printer to the right hand side. Be careful not to spill oil inside the
printer. It could cause considerable damage to the printer.
Fig. 5-6