Brother HL-2600CN Series - Manual (Page 132)

CHAPTER 5 MAINTENANCE
5-20
5. Remove the Tension Release
Pins from both sides of the new
OPC Belt Cartridge.
Fig. 5-15
Remove the protective sheet
from the new OPC Belt
Cartridge. Do not touch the
green part of the OPC Belt
Cartridge.
Fig. 5-16
6. Insert the new Belt Cartridge
into the printer guides with the
flat side facing you.
Fig. 5-17
7. To lock the cartridge into the printer, press the Belt Cartridge Lock
Levers that are on both sides of the OPC Belt Cartridge to the rear.
8. Close the Front Cover and the Top Cover.