Brother HL-2600CN Series - Manual (Page 122)

CHAPTER 5 MAINTENANCE
5-10
! Warning
The Fusing Unit and the parts around it are HOT! Be sure to wait until
the Fusing Unit has cooled sufficiently before you replace the Oil
Bottle.
If you touch the HOT parts (shaded area shown below), you might get
injured.
! Caution
• Be careful not to spill oil inside the printer. It might cause considerable
damage and void your warranty. If you spill some oil, consult your
dealer or Brother authorized service representative.
• Do not loose the Oil Bottle cap. It might cause the oil to leak.