Brother HL-2600CN Series - Manual (Page 143)

CHAPTER 5 MAINTENANCE
5-31
4. Clean the area where the new
Paper Discharger is to be
installed with a cotton cloth.
Fig. 5-30
5. Install the new Paper Discharger
into the Transfer Unit in the
reverse order that you removed
it.
Fig. 5-31
6. Plug the printer into the AC outlet.
7. Press the Power button to turn on the printer.
8. Press any of the Menu button (+, – , Set or Back) to take the printer Off
Line.
9. Press + or – until “RESET MENU” appears.
10. Press Set to proceed to the next menu level, and then press + or – until
“PARTS LIFE” appears.
11. Press Set, and then press + until “120K KIT” appears.
12. Press Set, and then press Go. The printer is now in the READY state.