AirLive WL-1200CAM - Manual (Page 9)

AirLive WL-1200CAM User’s Manual
6
1.3 Product Highlights
 No pre-loaded software required - all you need is a browser like Internet Explorer 6 with SP2
(and above, with plugin installed).
 Supports VGA (640 x 480), QVGA (320 x 240), and QQVGA (160 x 120) video resolution.
 Supports 2-way audio transmission, with speaker output and built-in microphone.
 Anti-flicker function (eliminates flash caused by fluorescent lights, 50 / 60Hz selectable).
 Supports two video compression format (MJPEG and MPEG4).
 Wired and wireless network (802.11b / 802.11g) support, supports up to 100Mbps for wired
network and 54Mbps for wireless network.
 Wireless data encryption (WEP / WPA / WPA2 / WPANone)
 Supports DHCP and PPPoE protocol, you can also assign a fixed IP address to the camera
also.
 Supports Dynamic DNS (used to allocate the IP camera ’s Internet address, when the ISP
you ’re using does not assign you with a fixed Internet address).
 Supports UPnP, Windows XP (and above) will discover this IP camera in network neighbor
automatically.
 Send captured picture by Email or FTP when motion is detected.
 Configurable motion detection sensitivity
 Upgradeable firmware - enjoy new functions without buying a new camera!
 Supports up to 4 users, and you can set different password to different user.
 Usage and event logging.