AirLive WL-1200CAM - Manual (Page 48)

AirLive WL-1200CAM User’s Manual
45
2.9 Users
If you wish to allow other people to view the image captured by this camera, but don ’t want to allow
them to modify system settings, you can give them user-level user name and password, so they can
only view the image and can not change any system setting. When they want to click menus other than
‘Camera’, they will see the following message informing that they don’t have permission to do that:
This IP camera supports up to 4 users.
You can access this menu by clicking ‘Users’ on the top of web management interface.
Please note: only one user (including administrator) will be able to view the image of IP camera at the
same time.
The descriptions of every setting in this menu will be given below:
Item Description
User (1 - 4) Select ‘Enable’ to enable this user (allow him / her to login), and
select ‘Disable’ to disallow him / her to login.
Selecting ‘Disable’ won’t erase the user name and password, so you
can select ‘disable’ to disallow a user from logging in temporarily,
without erasing it ’s account information.
Login Specify the user name here. Please use alphanumerical characters
(0 to 9, A to Z, and a to z). Not using symbols and space.
Password Specify the password for this user here.
Confirm Password Specify the password for this user here again.