AirLive WL-1200CAM - Manual (Page 62)

AirLive WL-1200CAM User’s Manual
59
The descriptions of every setting in this menu will be given below:
Item Description
Send a Test Email After the settings in this page is complete and saved (by clicking ‘OK’),
you can click this button to send a test E-Mail to verify if these settings
are correct and working.
Recipient E-Mail Address Input the email recipient’s Email address here.
SMTP Server Input the IP address or host name of the SMTP server (the server that
delivers the Email for you) here.
If you don’t know, please refer to the SMTP server you’re using in your
Email software (like Outlook, Outlook Express etc.), or ask your
network administrator or ISP.
Sender E-Mail Address Input the Email address of mail sender, this will help you to identify the
Email sent by th is IP camera by sender’s Email address.
NOTE: Some mail server would reject to deliver the Email from
unknown sender, it’s recommended to input your own Email address
here, or any other actual one.
SMTP Authentication Some SMTP server requires mail senders to be authenticated before
they can send Email. If your SMTP server requires you to do so,
please select ‘Enable’, or select ‘Disable’ to disable it. If you don’t
know, please refer to the SMTP server you’re using in your Email
software (like Outlook, Outlook Express etc.), or ask your network
administrator or ISP.
User Name Please input the user name of SMTP server here, if your SMTP server
requires the use of authentication.
Password Please input the password of SMTP server here, if your SMTP server
requires the use of authentication.
After all settings are completed, click ‘OK’ to save settings, or click ‘Cancel’ to abort and discard
changes.