AirLive WL-1200CAM - Manual (Page 36)

AirLive WL-1200CAM User’s Manual
33
Click ‘Apply’ to save settings and make the new settings take effect.
2.4.2 MPEG4
If you selected ‘MPEG4’ as the video encoding format of this IP camera, you can specify the
parameters of MPEG4 video encoder here.
The descriptions of every setting in this menu will be given below:
Item Description
Video Resolution Specify video resolution of MPEG4 video encoder. Available options are
VGA and QVGA resolution. VGA resolution provides more details than
QVGA, but requires more network bandwidth.
Video Quality 1. Specify video encoding rate of MPEG4 video encoder.
2. CBR: Available options are from 200Kbps to 2Mbps. Greater video bit
rate provides better video quality, but requires more network
bandwidth.
3. VBR: Available from Lowest/ Low/ Normal/ High/ Highest
Video Frame
Rate
Specify video refresh rate of MPEG4 video encoder. Higher video refresh
rate provides more details about motion, but requires more network
bandwidth.
CAUTION: Choosing a low frame rate will save bandwidth, but may not be
able to capture every motion if the object that IP camera points to is moving
fast.
Click ‘Apply’ to save settings and make the new settings take effect.