AirLive WL-1200CAM - Manual (Page 61)

AirLive WL-1200CAM User’s Manual
58
Must be the same with the setting of the wireless device you wish to
connect.
Default Key: Select the default encryption key of WEP encryption.
Available options are Key 1 to Key 4; in most cases you should use
Key 1, unless otherwise instructed.
Key 1 to Key 4: Input the WEP encryption key here in respective field.
In most cases only Key 1 is required.
When you finish with setting, click ‘OK’ to save settings.
Edit You can edit the content of a selected profile.
Delete You can delete a selected profile. You WILL NOT be prompted before
deleting a profile, use with caution.
Activate Activate selected profile (connect to the wireless device defined in the
profile).
After all settings are completed, click ‘OK’ to save settings, or click ‘Cancel’ to abort and discard
changes.
3.3.3 E-Mail Settings
The ‘E-Mail Settings’ tab lets you to configure the E-mail alert settings of the IP camera. An E-mail will
be sent to the address you specified here when the IP camera detects motion, so you can be alerted by
E-mail anywhere & anytime.