2 date/time – AirLive RS-3000 User Manual

Page 24

4.2 Date/Time

Synchronize system clock:

 Synchronizing the RS-3000 with the System Clock. The administrator can configure the

RS-3000’s date and time by either syncing to an Internet Network Time Server (NTP) or by

syncing to your computer’s clock.

STEP 1

﹒Select Enable synchronize with an Internet time Server (Figure 4-7)

STEP 2

﹒Click the down arrow to select the offset time from GMT.

STEP 3

﹒If necessary, select Enable daylight saving time setting

STEP 4

﹒Enter the Server IP / Name with which you want to synchronize.

STEP 5

﹒Set the interval time to synchronize with outside servers.

Figure 4-7 System Time Setting

Click on the Sync button and then the RS-3000’s date and time will be synchronized to the

Administrator’s PC

The value of Set Offset From GMT and Server IP / Name can be looking for from Assist.