AirLive RS-3000 - Manual (Page 129)

Define the required fields of Policy
Source and Destination:
 Source IP and Destination IP is according to the RS-3000’s point of view. The active side is the
source; passive side is destination.
Service:
 It is the service item that controlled by Policy. The user can choose default value or the custom
services that the system manager set in Service function.
Action, WAN Port:
 Control actions to permit or reject packets that delivered between LAN network and WAN network
when pass through RS-3000 (See the chart and illustration below)
Chart Name Illustration
Permit all WAN network
Interface
Allow the packets that correspond with policy to be
transferred by WAN1/2 Port
Permit WAN1
Allow the packets that correspond with policy to be
transferred by WAN1 Port
Permit WAN2
Allow the packets that correspond with policy to be
transferred by WAN2 Port
DENY
Reject the packets that correspond with policy to be
transferred by WAN Port
Permit VPN
Allow the VPN packets that correspond with policy to
be transferred
127