6 system time – AirLive N450R User Manual
Page 80
AirLive N450R User’s Manual
75
1. Dynamic Routing
Routing Information Protocol (RIP) will exchange information about destinations for
computing routes throughout the network. Please select RIPv2 only if you have
different subnet in your network. Otherwise, please select RIPv1 if you need this
protocol.
2. Static Routing
For static routing, you can specify up to 8 routing rules. You can enter the destination
IP address, subnet mask, gateway, and hop for each routing rule, and then enable
or disable the rule by checking or un-checking the Enable checkbox.
Click on “Save” to store your settings or click “Undo” to give up the changes.
3.5.6 System Time
1. Time Zone
Select a time zone where this device locates.
2. Auto-Synchronization
Check the “Enable” checkbox to enable this function. Besides, you can select a NTP
time server to consult UTC time.
3. Sync with Time Server
Click on the button if you want to set Date and Time by NTP Protocol manually.
4. Sync with my PC
Click on the button if you want to set Date and Time using PC’s Date and Time
manually.
.Click on “Save” to store your settings or click “Undo” to give up the changes.