5 mac control – AirLive N450R User Manual
Page 68
AirLive N450R User’s Manual
63
For example, you can use pre-defined word "sex" to block all websites if their URLs
contain pre-defined word "sex".
3. Enable
Check to enable each rule.
4. Use Rule#
You can set a schedule rule for each of rule.
Click on “Save” to store your settings or click “Undo” to give up the changes.
3.4.5 MAC Control
MAC Address Control allows you to assign different access right for different users and to
assign a specific IP address to a certain MAC address.
1. MAC Address Control
Check “Enable” to enable the “MAC Address Control”. All of the settings in this
page will take effect only when “Enable” is checked.
2. Connection control
Check "Connection control" to enable the controlling of which wired and wireless
clients can connect with this device. If a client is denied to connect with this device,
it means the client can't access to the Internet either. Choose "allow" or "deny" to
allow or deny the clients, whose MAC addresses are not in the "Control table"
(please see below), to connect with this device.