AirLive N450R User Manual
Page 36
AirLive N450R User’s Manual
31
6. NAT disable
You can disable NAT feature if required.
7. IGMP Proxy
Enable this feature allows multicast stream (e.g. IPTV stream) to pass-through this
device.
(E) PPP over Ethernet
1. WAN Type
Choose PPP over Ethernet.
2. IPv6 Dual Stack
If your ISP supports IPv6 dual stack, you can check this check box to get an IPv4
address and an IPv6 address via one PPPoE connection. After you check this check
box, you also need to enable IPv6 function at Advanced Setting->IPv6 setting page.
3. PPPoE Account and Password
The account and password your ISP assigned to you.
4. Primary DNS
You can indicate IP address of primary DNS if required.
5. Secondary DNS
You can indicate IP address of secondary DNS if required.
6. Maximum Idle Time
The amount of time of inactivity before disconnecting your PPPoE session. Set it to
zero or enable “Auto-reconnect” to disable this feature.