AirLive N450R User Manual
Page 49
AirLive N450R User’s Manual
44
WDS Hybrid Mode
1. Wireless Operation Mode W
Choose WDS Hybrid mode.
2. Wireless Schedule
You can limit Wi-Fi functions in a period of time if required.
3. Channel
The radio channel number. The permissible channels depend on the Regulatory
Domain.
The factory default setting is Auto, channel 1~11 for North America, channel
1~13 for European (ETSI) and channel1~ 14 for Japan.
4. Network ID (SSID)
Network ID is used for identifying the Wireless LAN (WLAN). Client stations can roam
freely over this device and other Access Points that have the same Network ID. (The
factory default setting is “airlive2.4g”)
5. SSID Broadcast
The router will broadcast beacons that have some information, including SSID so that
wireless clients can know how many AP devices by scanning the network. Therefore, if
this setting is configured as “Disable”, the wireless clients cannot find the device from
beacons.
6. Wireless Mode
Choose “B/G mixed”, “B only”, “G only”, “N only”, “G/N mixed” or “B/G/N mixed”.
The factory default setting is “B/G/N mixed”.