AirLive N450R User Manual
Page 74
AirLive N450R User’s Manual
69
1. Cross-layer QoS
You can select enable/disable the QoS control
2. QoS Mode
You can select Smart-QoS or User defined QoS rule for your own QoS control
3. Bandwidth of upstream / bandwidth of Downstream
You can input the value of maximize of upstream and downstream bandwidth from
your ISP
4. Enable Flexible Bandwidth management
If you enable this management, system will share the bandwidth of those selected
applications to other applications if user do not run those selected application, for
example, If you select Game/ VoIP/ Video 3 applications for higher priority in your
system, then the system will automatically reserve 10% of bandwidth to other
application, and share the rest of bandwidth (100-10)/3=30% each to
Game/VoIP/Video, so if user do not play a game, then the system will flexible share
the 30% of bandwidth to other application.
5. Example for Smart-QoS with FBM enable
Mr. Wang selects Game/ VoIP/ Video 3 applications for higher priority in his system,
the system will automatically reserve 10% of minimum rate of bandwidth to other
application, and share the rest minimum rate of bandwidth (100-10)/3=30% each to
Game/VoIP/Video. If Mr. Wang’s son plays on-line game in the morning, the total
bandwidth will all reserve to his son. By the evening, when Mr. Wang back home and
wants to watch IPTV, then he will get the same priority with his son, and share the
bandwidth.
6. Disable Flexible Bandwidth Management
If you disable this management, system will allow you to input percentage of
bandwidth manually.
(B) User defined QoS Rule