AirLive N450R User Manual

Page 34

AirLive N450R User’s Manual

7. Maximum Idle Time

The amount of time of inactivity before disconnecting Internet connection. Set it to zero,
or choosing “Auto-reconnect” mode to disable this feature.

8. Service Name

Input the service name if your ISP requires it. (Optional)

9. Assigned IP Address

Input a IP address if your ISP requires it. (Optional)

10. Maximum Transmission Unit (MTU)

You can change MTU value if required. The default MTU value is set to 0 (auto).

11. NAT disable

You can disable NAT feature if required.

12. IGMP Proxy

Enable this feature allows multicast stream (e.g. IPTV stream) to pass-through this
device.

(C) Static IP Address

1. WAN Type

Choose Static IP Address.

2. WAN IP Address

Input the IP address you got from ISP.

3. Subnet Mask

Input the subnet mask of IP address you got from ISP.

4. WAN Gateway

Input the IP address of WAN gateway you got from ISP.

5. Primary DNS

Input the IP address of primary DNS you got from ISP.

6. Secondary DNS

Input the IP address of secondary DNS you got from ISP.