AirLive N450R User Manual
Page 35
AirLive N450R User’s Manual
30
7. NAT disable
You can disable NAT feature if required.
8. IGMP Proxy
Enable this feature allows multicast stream (e.g. IPTV stream) to pass-through this
device.
(D) Dynamic IP Address
1. WAN Type
Choose Dynamic IP Address.
2. Host Name
Optional, required by some ISPs, for example, @Home.
3. ISP registered MAC Address
Some ISP (Cable Company) will record your MAC address on PC. You can press
“Clone” button to copy the MAC address on your PC here, or you can input it manually.
4. Maximum Idle Time
The amount of time of inactivity before disconnecting Internet connection. Set it to zero,
or choosing “Auto-reconnect” mode to disable this feature.
5. Connection Control
There are 3 options to start connection:
n
Auto Reconnect (Always-on)
The device will always try to link to Internet.
n
Connect-on-demand
The device won’t try to connect to Internet until LAN PCs or devices try to go to
Internet. Once Internet connection is established, this device will drop the
connection if maximum idle time is reached.
n
Manually
The device won’t try to connect to Internet until users press “connect” button at
Status page. Once Internet connection is established, this device will drop the
connection if maximum idle time is reached.