5 reset to default, 6 reboot, 7 miscellaneous – wake on lan & ping – AirLive N450R User Manual
Page 101
AirLive N450R User’s Manual
96
3.7.5 Reset to Default
You can also reset this device to factory default settings by clicking the Reset to default
function item. Press “OK” to reset to factory default settings.
3.7.6 Reboot
You can also reboot this device by clicking the Reboot function item.
3.7.7 Miscellaneous – Wake on LAN & Ping
1. MAC Address for Wake-on-LAN
It enables you to power up a networked device remotely. If you would like to trigger this
function, you have to know the MAC address of this device. For instance if the MAC
address is 00-11-22-33-44-55, enter it into the blank of MAC Address for
Wake-on-LAN. Afterwards, click "Wake up" button which makes the router to send the
wake-up frame to the target device immediately.