AirLive N450R User Manual
Page 38
AirLive N450R User’s Manual
33
6. Connection ID
Optional. Input the connection ID if your ISP requires it.
7. Maximum Idle Time
The amount of time of inactivity before disconnecting your PPTP session. Set it to zero
or enable “Auto-reconnect” to disable this feature.
8. Connection Control
There are 3 options to start connection:
n
Auto Reconnect (Always-on)
The device will always try to link to Internet.
n
Connect-on-demand
The device won’t try to connect to Internet until LAN PCs or devices try to go to
Internet. Once Internet connection is established, this device will drop the
connection if maximum idle time is reached.
n
Manually
The device won’t try to connect to Internet until users press “connect” button at
Status page. Once Internet connection is established, this device will drop the
connection if maximum idle time is reached.
9. Maximum Idle Time
The time of no activity to disconnect your PPTP session. Set it to zero or enable
“Auto-reconnect” to disable this feature.
10. Maximum Transmission Unit (MTU)
Most ISP offers MTU value to users. The default MTU value is 0 (auto).
11. IGMP Proxy
Enable this feature allows multicast stream (e.g. IPTV stream) to pass-through this
device.
NOTE: The items with * above are only available when choosing Static IP Address in IP
mode.