AirLive N450R - Manual (Page 66)

3. Configuration
AirLive N450R User’s Manual 61
You can specify 8 rules for each direction: inbound or outbound. For each rule, you can
define the following:
n Source IP address
n Destination IP address
n Destination port
n Enable or Disable
n Use Rule#
For source or destination IP address, you can define a single IP address (4.3.2.1) or a
range of IP addresses (4.3.2.1-4.3.2.254). An empty implies all IP addresses.
For source or destination port, you can define a single port (80) or a range of ports
(1000-1999). Add prefix "T" or "U" to specify TCP or UDP protocol. For example, T80, U53,
U2000-2999, No prefix indicates both TCP and UDP are defined. An empty implies all port
addresses. Packet Filter can work with Scheduling Rules, and give user more flexibility
on Access control. For Detail, please refer to Scheduling Rule.
Each rule can be enabled or disabled individually.
Click on “Save” to store your settings or click “Undo” to give up the changes.
3.4.3 Domain Fitters
Domain Filter prevents users under this device from accessing specific URLs.
1. Domain Filter
Check if you want to enable Domain Filter.
2. Log DNS Query
Check if you want to log the action when someone accesses the specific URLs.