4 snmp – AirLive N450R User Manual
Page 78
AirLive N450R User’s Manual
73
1. QOS Control
Check Enable to enable this function.
2. Bandwidth of Upstream
Set the limitation of upstream bandwidth
3. Local IP : Ports
Define the Local IP address and ports of packets
4. Remote IP : Ports
Define the Remote IP address and ports of packets
5. QoS Priority
This defines the priority level of the current Policy Configuration. Packets associated
with this policy will be serviced based upon the priority level set. For critical
applications High or Normal level is recommended. For non-critical applications select
a Low level.
6. Enable
Check to enable the corresponding QOS rule.
7. User Rule#
The QoS rule can work with Scheduling Rule number#. Please refer to the Section
3.1.4.7 Schedule Rule.
Click on “Save” to store your settings or click “Undo” to give up the changes.
3.5.4 SNMP
In brief, SNMP, the Simple Network Management Protocol, is a protocol designed to give
a user the capability to remotely manage a computer network by polling and setting
terminal values and monitoring network events.