AiM LCU-One CAN + Analog ver 1.05 User Manual

Page 22

LCU ONE-CAN+Analog

User manual
Release 1.05

www.aim-sportline.com

Central in the page

a table made of 7 columns shows the controller channels.

Enabled/disabled: shows channel status (enabled/disabled). It can be modified checking
or un-checking the related checkbox. LCC_lambda (Lambda value) and LCC_AFR
(AFR value) channels are enabled by default.
Channel name: shows the name of the channel and can be modified double clicking on
the cell, that becomes editable.
Sampling Frequency: shows the channel sampling frequency and can be set through
the pop up menu that appears clicking on the cell (accepted values are from 1 to 50
Hz).
Sensor type: shows the sensor installed on that channel and can not be modified.
Measure Unit: shows the unit of measure used to sample that channel and can be
modified double clicking on the cell.
Low/High scale: these columns show the channels low and high scale and can be
modified double clicking on the cells.