AiM LCU-One CAN + Analog ver 1.05 User Manual
Page 21
LCU ONE-CAN+Analog
User manual
Release 1.05
www.aim-sportline.com
20
The layer is modified as shown below and as many additional layers as many Lambda
probe have been added appear.
In case serial number has not been get, press “Get serial number from a connected
expansion” button.
Warning: this operation is necessary to transmit the configuration to the
controller.
The layer concerning the probe is shown above.
Top
Fields “Name of expansion configuration (6 characters max)” and “Serial number of
expansion”. Inserting a name for the new configuration the layer label is modified live.
As far as serial number is concerned, see before.