Lcr table – 2N StarGate/BlueTower v5.7 User Manual

Page 91

Table of Replaced Prefixes

Use this table to replace the prefix of the received number (‘00’ with ‘+’, e.g.). You can
only add or remove the prefix. This change is made before the prefix is searched for in
the prefix table. Be sure to keep the „/“ record in the table for a proper function.

Table of Accepted Prefixes

List of prefixes of called destinations to which the selected prefix list applies.

Prefix Change for PRI 1 to PRI 2 Calls

A table of prefixes to be replaced in the case of PRI 1 to PRI 2 outgoing calls.

LCR Table

Table of outgoing Least Cost Routing (LCR) rules. Every outgoing call from the PRI
1/VoIP interface is routed to GSM / UMTS according to this table. For a call, the
gateway checks the lines and if the called number prefix matches the prefix in the
selected network list and the current time value is within time limitation limits, the call
will be routed via the defined GSM group(s) or PRI 2 interface.

Prefix list – prefixes to be used for a selected LCR row.
Time limitation – time validity limitation for a selected LCR row.
Weekend usage – enable/disable a row on weekends.

Call duration lim

– set the maximum duration (minutes) for an outgoing call

to the GSM/UMTS network.
Groups – outgoing GSM groups used for the selected LCR row.

Note

The number to be dialled to the GSM/UMTS network must meet the

condition.

Count of digits
For

calls, the count of digits to be dialled must be equal to or higher

VoIP

than the value set in the

Count of digits

For GSM/UMTS calls by overlap dialling via the

interface, the

PRI NT/TE

defines the maximum count of the digits to be dialled.

Count of digits
For GSM/UMTS calls by block dialling via the

interface, the

PRI NT/TE

is ignored.

Count of digits

Note

The maximum count of records in the

is 14

Table of replaced prefixes

for each prefixlist.
The maximum table record size is 9 characters for the prefix and 9
characters for the replaced number.

Note

The maximum count of records in the

is 138

Table of accepted prefixes

for each prefixlist.
The maximum table record size is 9 characters.