2N StarGate/BlueTower v5.7 - Manual (Page 127)

127
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Restart – Reboot of the eCPU. You are recommended to use this function instead
of the hard reset by switching off/on the whole system.
CDR – An automatic CDR download from the basic CPU to the micro-SD card
located on the eCPU board (enhanced CPU Board). When the CDR function is
activated, all CDR will be automatically downloaded and saved onto a micro-SD
card. The saved CDR are available for download in this section of web interface.
User accounts – Management of the users that can access the web interface or
use SMS services. The users are divided into nine groups. Group 0 is for service
accounts, groups 1-8 are designed for SMS delivery groups 1-8.
Service account Description
Admin Account for configuration eCPU
simstar Account for SIM Client
sms Account for SMS and SMS simulator
The access user name and password have the same format as with the SMTP/POP3
protocols (username@domainname).The default accounts are added by the default
settings (one per User group). Click on the
icon to add a new account to the Add user
system.
SMS User Interface
Added users authorised for SMS receiving/sending may log in to the eCPU web
interface with the user password and name.
The logged-in users have limited eCPU configuration rights.
Caution
The micro-SD card must be formatted according to the FAT32 system!
The CDR function will not start until the SD card is inserted in the system!
Tip
If you forget the Admin user password, you can restart the gateway with
restoring the factory settings using a serial console.