beautypg.com

2N StarGate/BlueTower v5.7 User Manual

Page 86

background image

86

2N TELEKOMUNIKACE a.s., www.2n.cz

®

Enable USIM and SIM Application Toolkit – enable/disable the USIM and SIM
Application Toolkit services for the Telit HE/GE 910 modules.

Disconnect Call

Set the rules for automatic disconnection of outgoing calls to a wireless network.

SIM limit exceeded – automatic call disconnection when the active SIM card
call limit is exceeded.
Time limit exceeded – automatic call disconnection when the active SIM card
time of use is exhausted.
No ALERTING before CONNECT – automatic call disconnection when the
gateway receives the call connect message without alerting.

Block SIM

Set the rules for SIM switching in the event of SIM limit exceeding.

– enable/disable SIM switching when

Tariff 0(...4) minutes limit exceeded
the tariff 0(...4) minutes limit has been exhausted.

– enable/disable SIM switching when the SMS limit has

SMS limit exceeded
been exhausted.

– enable/disable SIM switching when the maximum

Minutes limit exceeded
called minutes limit has been exhausted.

– enable/disable SIM switching when the

Daily minutes limit exceeded
maximum daily minutes limit has been exhausted.

Send CLIP from VoIP/ISDN to GSM/UMTS

Transfer CLIP to GSM/UMTS – enable/disable the function.
Separating char – define the CDN/CLIP separating character.
Modify (‘–’ remove one digit) – change the CLIP. The ‘–’ character is used for
deleting one character from the left.

GPRS Activation

APN string – define the Access Point Name (APN) for GPRS connectivity.

Basic Settings

Roaming enabled for network code – set the international network identifier
for roaming purposes consisting of the following two codes:

MCC – Mobile Country Code – country code (Czech Republic – 230);
MNC – Mobile Network Code – GSM code (T-Mobile – 01, 0202, Vodafone –
03).

Hence, the international identification code for T-Mobile CZ is 23001. Leave this field
empty to disable roaming.

Caution

The Send CLIP from VoIP to GSM service must be supported by the
GSM/UMTS provider’s network. Otherwise, the call may be rejected by
GSM/UMTS!