2N StarGate/BlueTower v5.7 User Manual

Page 88

Call tariffs – use this function to assign up to four independent free minute counters
to a group of GSM modules (SIM cards), e.g.:

Tariff 1 = free minutes for calls to own GSM/UMTS network.
Tariff 2 = free minutes for calls to other GSM/UMTS networks.
Tariff 3 = free minutes for calls to fixed network.
Tariff 4 = free minutes for calls within a closed user group (VPN).

Complete the LCR table (assign prefixes to tariffs) properly to make full use of this
function. If routing to a tariff is not used, the global free minutes function will be used
in the LCR table.

Free minutes – set the free minutes for the tariff offered by the provider.
Transferred minutes – set the maximum count of free minutes to be
transferred to the next period.

– set the interval to send AOC messages.

AOC sending interval
Day of restoring free minutes – set a day on which the free minute counters
will be reset automatically. Select every 24 hours, a day in a month, or a day in a
week.
Week of restoring free minutes in month – set a week in which the free
minute counters will be reset automatically. Set the week number only if the
restoration takes place

in a month, e.g., or keep

for

every other Friday

Every

the other cases.

Caution

The recommended free minute counter value is X–5, where X is the
number of free minutes obtained from the GSM/UMTS provider. Thus, you
can avoid exceeding limits.
The manufacturer is not responsible for additional call costs incurred as a
result of exceeding your GSM/UMTS provider’s free minute/SMS limit.