2N StarGate/BlueTower v5.7 - Manual (Page 148)

148
2N TELEKOMUNIKACE a.s., www.2n.cz
®
4.1 Basic Commands
System Information
ATI3 – Firmware version and copyright
ATI4 – Factory number
Statistics
AT&T Statistics of calls via PRI interface –
AT&TIN Statistics of incoming calls via GSM modules –
AT&TOUT – Statistics of outgoing calls via GSM modules
AT&T## Statistics of calls via SIM cards of GSM module ## –
AT%TPR=mi,ci,mo,co Setting of statistics via PRI –
AT%TG0=mi,ci,0,0 – Setting of statistics of incoming calls via all GSM modules
in GSM group 0
AT%TG#=mi,co,ri,ro –
Settings of statistics of GSM group #
AT%TGALL=mo.co,ri,ro – Settings of statistics of all GSM groups
AT%T##=#,mi,ci,si,mo,co,so – Settings of statistics of SIM card # of GSM
module ##
AT%T##=ALL,mi,ci,si,mo,co,so –
Settings of statistics of all SIM cards of
GSM module ##
AT%TALL=ALL,mi,ci,si,mo,co,so
Settings of statistics of all SIM cards of all –
GSM modules
Description of parameters:
Mi/mo – Minutes of incom./outg
callsCi/co – number of connected incom./outg
callsRi/ro – number of re-routed incom/outg
calls in groupSi/so – number of received/sent SMS messages
Wireless Engines
AT&Q## – Received GSM signal level (##=00-15)
AT&QALL
Received GSM signal level from all GSM modules –
AT&Gxx=atcmd Send command for AT commands directly to the GSM module –
AT&Gxx=at+cnum – SIM card telephone number
AT&Gxx=at+cpin="xxxx" – PIN entering
AT&Gxx=at+clck="sc",1"xxxx" – PIN request enable
AT&Gxx=at+clck="sc",0"xxxx" – PIN request disable
LOG and CDR List
AT&L – Log file listing (PRIGW awaits pressing of the Space bar in every 20
rows)
AT&C – Call file listing (PRIGW awaits pressing of any key in every 20 rows)
AT&CR – Call file listing and deleting (PRIGW awaits pressing of the # key to
delete this row /with call info/ from memory and sends the next row)
AT&CS – SMS file listing (GW awaits pressing of any key in every 20 rows)
AT&CSR – SMS file listing and deleting (GW awaits pressing of the # key to
delete this row /with SMS info/ from memory and sends the next row)
When you change these parameters, all the other counters will be reset!