2N StarGate/BlueTower v5.7 User Manual
Page 87
87
Input
Note
2300
Roaming is restricted (minimum is five digits)
23002
Roaming is permitted for network with MCC+MNC code 23002
230XX
Roaming is permitted for network with MCC+MNC codes 23000 – 23099
XX001
Roaming is permitted for network with MCC+MNC codes 00001 – 99001
XXXXX
Roaming is permitted for any network
CLIR – enable/disable presentation of the SIM CLIP on the called party’s
telephone. CLIR is recommended for the SIM card inserted in the GSM module to
avoid CallBack problems.
Maximum number of called minutes – define the maximum count of minutes
to be called within a month via the selected SIM card.
Count of SMS messages – define the maximum count of SMS messages to be
sent within a month via the selected SIM card.
Day of restoring call limit and delete statistics – select a day in a month on
which the Max count of called minutes and Count of SMS messages statistics
shall be deleted.
First count – set the length of the first pulse after which the pulse counting
change starts as defined in the Next count parameter.
Next count – set the length of one pulse in seconds after the time defined in the
First count parameter elapses.
Day limit of called minutes – set the maximum count of minutes to be called
within a day via the selected SIM card.
– set the interval to send AOC messages
AOC sending interval
Time Limits
There are two SIM use time limits in a GSM group.
Note
Before activating the roaming support, please check the SIM card for
correct setting of the GSM / UMTS priority network list.
Caution
Calls via roaming networks may cause additional call costs!
Caution
The
and
services
Temporary CLIP enable
Temporary CLIR enable
must be supported by the GSM/UMTS provider’s network. Otherwise, the
call may be rejected by GSM/UMTS!
Note
Set the two parameters above (
) properly to
First count, Next count
count free minutes on SIM cards correctly. These parameters are used for
limiting outgoing calls depending on free minutes. The CDRs contain real
data.