Clip tables – 2N StarGate/BlueTower v5.7 User Manual
Page 137
137
CGP – enter the strings to be directly compared with the CLIP received. The '_'
character is used as a masking character for one numeric character.
Company – set the value to be assigned to each CGP determining to which
subgroup the CGP is assigned. If there is no match, the received CGP is assigned
to subgroup 0.
Time from – set the beginning value of the time interval (hh:mm) for the
selected rule.
Time to – set the end value of the time interval (hh:mm) for the selected rule.
Day – define a day in the week on which the rule shall be applied (1= Monday,
…, 7 = Sunday).
Out table structure:
CGP
Company
Time from
Time to
Day
261301___
1
00:00
12:00
1234567
2353215__
2
12:00
24:00
1234567
261333111
100
00:00
24:00
1234567
261333222
101
00:00
24:00
12345
Clip Tables
Prefix – define the received called number or a part of it (the number is checked
from the left).
Company – use this parameter to define to which subgroup the rule is to be
applied.
Change prefix – use this parameter to modify the number to be dialled. The '-'
character removes one character from the left side of the called number. The
other characters are added to the called number beginning.
Delete last – use this parameter to remove characters from the right-hand side
of the called number. The value defines how many characters should be
removed.
Out group – use this parameter to specify the outgoing group for call routing. If
the group is set to 0, the call will be rejected. For direct routing to a selected