Fax lines – 2N OfficeRoute - User manual, 1493 v1.9.0 User Manual
Page 65
65
DISA Line Parameters
To add a new line, use the Add
icon below the form. To modify an existing line,
click on the Modify
icon. Upon the click, the entered data are confirmed and the
execution of the relevant operation is requested.
Below the form there are Reset
and Back
icons. The first one restores the
values of all fields as before the form opening and the other moves you to the previous
screen.
Figure 3.43: DISA Line
The form in Fig. 3.43 contains the following fields:
Type of DISA – there are five options
Basic DISA – Factory-set DISA message.
Basic DISA with uploaded message – Basic DISA message.
DISA/IVR on MMC card – DISA message saved in an external memory.
DISA/IVR on internal flash – DISA message saved on the internal flash
memory.
VoiceMail system – VoiceMail voice menu.
DISA parameters – Parameters are displayed for the selected DISA line. The
following options are available
Maximum allowed number of digits – Maximum number of digits in DISA.
Operator number – Enter the number to be called if no dialling is made.
Maximum message length – Define the maximum length of the message to be
left to the user in case the call is forwarded to VoiceMail.
Description – Any text that describes the meaning of a line.
Note
For examples of DISA settings refer to
Fax Lines
To add a new fax line use the Add
icon below the form. To modify an existing line
click on the Modify
icon. Upon the click, the entered data are confirmed and the
execution of the relevant operation is requested.