4 network settings – 2N OfficeRoute - User manual, 1493 v1.9.0 User Manual
Page 37
37
3.4 Network Settings
Main Configuration
Includes
own IP address, mask,
2N OfficeRoute/2N VoiceBlue Enterprise's
®
®
default gateway and DNS. There is also a possibility to switch on the DHCP client (when
does not serve as a DHCP server and
2N OfficeRoute/2N VoiceBlue Enterprise
®
®
there is another DHCP server in the network). It is also possible to select the main
settings via a serial console or a Telnet console.
Figure 3.14: Main Configuration
The form includes the following items:
Enable DHCP – Select whether the network parameters should be obtained from
the DHCP server, or whether they should be set manually.
IP address – Set the IP address of the device. If Dynamic address allocation via
DHCP is enabled, the value cannot be changed manually.
Network mask – Set the network mask. If Dynamic address allocation via DHCP
is enabled, the value cannot be changed manually.
Gateway – Set the IP address of the default router. Used for data traffic routing
beyond the network limits. If dynamic address allocation via DHCP is enabled,
the value cannot be changed manually
.
PPPoE enabled – Enable/disable connection via the PPPoE protocol. The User
and
help identify the user.
name
Password
DNS1 – Set the IP address of the first DNS.
DNS2 – Set the IP address of the second DNS.
Click on
to confirm the changes. Setting new values takes some time; please
Modify
wait for the browser response.