2N OfficeRoute - User manual, 1493 v1.9.0 - Manual (Page 13)

13
2N TELEKOMUNIKACE a.s., www.2n.cz
®
2.2 Before Installation
Packing List
Please check whether the contents of the package of your new OfficeRoute/ 2N
®
2N
®
complies with the following list. VoiceBlue Enterprise
1 – check the part number, see the type label on the gateway 2N OfficeRoute
®
back side
1 12V/2.5 A mains adapter
1 USB cable
1 ETHERNET cable
1 Antenna
1 Wall mounting holder
2 Dowels
2 Screws
Quick user guide
Compliance certificate
2N
®
product CD
Warranty certificate
Brief Installation Guide
Proper mounting – is designed 2N
®
OfficeRoute/2N VoiceBlue Enterprise
®
for suspension on a vertical surface. Fit the holder included in the delivery on a
wall and hang the gateway on it. For details on the prescribed working position
and other recommendations refer to Section 2.4.
Cable connection – connect the gateway using a patch-cable to the LAN (Local
Area Network).
Antenna connection – connect an internal antenna or an external antenna
cable to the SMA antenna connector. Install the external antenna on a place with
a good UMTS/GSM signal.
Gateway power supply – the delivery includes a mains adapter. Plug in the
adapter connector into the gateway and the power adapter into a mains socket
(≈230V/50Hz). The gateway turns on immediately.
SIM card insertion – insert the SIM cards in the holders on the gateway top.
PC connection and initial configuration – a web browser is used for gateway
configuration in normal operation. If you have not defined the IP address for the
gateway, use the USB cable included in the delivery for initial configuration of the
basic parameters or reach on its 2N
®
OfficeRoute/2N VoiceBlue Enterprise
®
default IP address 192.168.1.1.
Setting and monitoring – having set the basic network parameters (IP
address, etc.), you can configure 2N OfficeRoute/2N VoiceBlue Enterprise
® ®
using a standard web browser (http or https). Configuration options and essential
procedures shall be discussed in detail in the respective sections.