2N Lift emergency phone 2N SingleTalk - Manual, 1514 v6.3.0 - Manual (Page 20)

Before You Start 2.2
19
ST Installation Conditions
 ST is not designed for outdoor applications.
 The product is connected to a telephone line where life-endangering voltage
may occur. Therefore, be sure to keep the safety precautions – refer to the
Electric Installation section.
 It is forbidden to connect ST parallel to another terminal on a line.
 The lift wall must be perfectly flat.
Tip
 Use a portable telephone to check the telephone line function.
 Do you know the telephone line number to be used? Check its
functionality.
 For a PBX line connection, check other relevant conditions as included in
the Ways of ST Connection section.
 Make sure that the lift panel has been prepared properly for ST mounting.
Universal version
 Check the lift panel for advance preparation for ST mounting.
Compact version
 It is advisable to mount ST where the lift cabin wall is also accessible from the
outside (from the lift shaft).