2N Lift emergency phone 2N SingleTalk - Manual, 1514 v6.3.0 - Manual (Page 12)

2N® SingleTalk Components and Associated Products
1.2
11
Associated Products
913630E
2N
® LiftManager
The 2N ® LiftManager software is intended for dispatcher’s centres that communicate
with the 2N ® LiftNet, 2N ® Lift EasyTalk and 2N ® SingleTalk equipment. The
application requires a standard PC-modem configuration and a telephone line. A
multiple operator workstation network can be achieved by increasing the number of
telephone lines and PCs.
Note: Service Tools, a software for 2N
® SingleTalk configuring, upgrading etc.
via PC, is a free and can be installed separately, without 2N ® LiftManager.
5013331E
2N
® EasyGate Pro
GSM gateway for
2N
® LiftNet
2N ® SingleTalk
Replaces a fixed telephone line.
Easy installation, no configuration requirements.
Batteries are integrated.
Call duration until two hours.
91360...
91361...
2N ® SingleTalk
A communicator designed to connect
multiple lifts to a single telephone line,
allowing for local communication
between the lift cabin, machine room
and other places.