Table of parameters 3.2, 42 low credit checking with prepaid sim – 2N Analogue GSM gateway 2N EasyGate PRO - Manual, 1749 v1.03 User Manual
Page 42

Table of Parameters
3.2
42
Low credit checking with prepaid SIM
Time period for low credit checking [h]
Function No.: 710
Set to change time interval between credit checks. If your credit drops under
defined value, EasyGate sends SMS "LOW CREDIT". The "0" setting means that
the function is disabled.
Setting options:
0-255 h
Step:
1 h
Default setting:
0
Code for credit checking
Function No.: 711
Credit in prepaid SIM cards is checked by network function, which displays text
message on mobile phone display. Code of network function must be terminated
with "#" symbol.
Attention
n
Find out if you have to pay for this function. Every check can lower your
credit.
Setting options:
0-8 characters (0-9,*,#,+)
Default setting:
blank
Minimal credit
Function No.: 712
Set minimal credit value to send warning SMS "LOW CREDIT". If credit is lower
then given value, warning SMS is send after every credit check, until you recharge
your SIM card.
Setting options:
0-999
Step:
1
Default setting:
0
Credit value position in received SMS
Function No.: 713
If there are more numbers except credit value in text answer (e.g. date, time and
so on) EasyGate seeks the number corresponding with credit value from given
position in text. The seek algorithm skips every non-number character. If credit
value is the first number in text you can leave setting 0. If there are other
numbers before credit value, set parameter to text position, from which the
algorithm will seek.
Setting options:
0-180
Step:
1
Default setting:
0