Gsm or umts routing parameters, Table of parameters 3.2 – 2N Analogue GSM gateway 2N EasyGate PRO - Manual, 1749 v1.03 User Manual
Page 37

Table of Parameters
3.2
37
Setting step:
1 s
Default setting:
0 s
Time limit [min]
Function No.: 399
After time elapsing is call connection terminated immediately. You can hear beep
30s before end of call. 10s before end you can hear beep every second. The "0"
setting means that the function is disabled.
Setting options:
0-255 min
Setting step:
1 min
Default setting:
0 (disabled)
Bank No
Function No.: -
Special function – with FW 1.5x and 3.5x only. Don’t use this parameter and the
menu ‘Free minutes bank’, with detailed setting of free minutes banks, for
standard Easy Gate.
GSM or UMTS routing parameters
Incoming calls from mobile network contain the CLI. According to received CLI Easy
Gate can do following:
· Reject the call;
· Use function CallBack – automatic call to the GSM subscriber;
· Automatic dial in. EasyGate dials preprogrammed PBX subscriber number (for
example switchboard operator) to be connected with calling subscriber.
FXS line Off-Hook to DISA timeout [ms]
Function No.: 500
Timeout between FXS line Off-Hook and automatic dial in according to parameter
"Dial in" in the table.
Setting options:
100-25500 ms
Setting step:
100 ms
Default setting:
2000 ms
Max. ring time for CallBack
Function No.: 502
Parameter sets up a behaviour for CallBack function. You've got 2 options how to
use a Callback on the FXS port:
Simple CallBack - set up for 0. During an incoming call the FXS port gives a
ringing. When the FXS port is off-hooked an incoming call is rejected and after
10s the gateway calls back. During those 10s the caller must hang up to be
ready for answering the callback call. On the FXS port a melody is played.
Advanced Callback - set up for 1-255. During an incoming call the FXS port gives
a ringing. If the caller wants to use a callback functionality he/she must hang up
before the parameter Max. ring time for Callback runs out. The gateway then
calls back immediately. If the call is answered on the analog side earlier the
called party hears the melody. If the call is answered on the mobile network side