Disassembly and assembly, Disassembly and assembly -19 – JLG 601S ANSI Service Manual User Manual

Page 59

SECTION 3 - CHASSIS & TURNTABLE

3120746

– JLG Lift –

3-19

4. Assemble the sealing ring. The fitting tool will hold

the sealing ring in the correct position in the pump
housing.

5. Assemble the snap ring.

6. Assemble

the snap ring in the correct position.

Disassembly and Assembly

1. Disassemble

the pilot valve.

2. Mark the position of the port plate and remove the

socket screw from the port plate.

3. Remove the port plate together with the valve plate

(hold the valve plate so that the plate can’t fall
down).