JLG 4013PS Service Manual - Manual (Page 145)

9-5 3508PS, 3509PS, 3512PS, 3513PS, 4008PS, 4009PS, 4012PS, 4013PS, 4017PS, 40.8, 40.9
Electrical System
9.4 SOFTWARE LEVEL 2 ACCESSIBILITY
The following parameters can be altered in the 2nd level of access to the machine’s software.
9.4.1 Operator Tools
Function Description
Change Anti Theft
Code Allows the owner to change the Anti Theft Code
Perform Hardware
Exchange Allows the owner to restore machine data (anti theft code, engine hours, machine
personalities, etc.) in the event that the machine controller or display/cluster gauge has
been replaced
Confirm Machine
Service Allows the owner to turn off the Service Required Warning lamp when service is
performed
Review Service History Allows the owner to see the last 15 times the Service Required Warning lamp was reset
Set Service Interval Allows the owner to modify the default service interval of 100 hours
Cabin Joystick
Telescope: X-Axis/
Roller Allows the owner to change/swap operation of the joystick Telescope and Fork Tilt
functions.
NOTE: This change requires the installation of a new joystick operation decal in the cab.
Contact your local authorized distributor.