Eppendorf Multiporator - Manual (Page 7)

49
For reasons of personal safety, it is essential to observe the following!
● Observe the instructions contained in the operating manual
It is essential to comply with the information given in the manual!
● Only use the device with a power supply which has a grounding
contact!
● Before starting up the Multiporator

, please ensure that the power
supply used corresponds to the voltage specifications on the
identification plate!
● Do not use the device if it is damaged, especially if the mains cable is
damaged.
● The unit may be opened only by authorized service personnel! Before
opening the device, switch it off and remove the power supply plug.
Potentially lethal voltage inside the unit.
● Do not operate the device in an explosive environment!
● Do not allow any liquid to enter into the Multiporator

or the inserts!
● The device should be used for in vitro applications only!
● Use the device only for the purpose for which it is intended.
Do not place parts, devices, tools or other objects into the cuvette
insert which have not been recommended by Eppendorf AG.
High voltage!
● Use the listed accessories only.
Other accessories may only be used if they are accompanied by a
safety certificate from Eppendorf AG confirming their suitability for
use!
● Electrical connection to devices which are not mentioned in this
operating manual is only permitted with the prior consent of the
manufacturer!
● The Helix fusion chamber must be handled with care.
Loose or damaged electrodes adversely affect operating procedures.
In such cases, the Helix fusion chamber must not be used!
Do not open the Helix fusion chamber until fusion has finished!
● The Micro fusion chamber must be handled with care.
Take care when filling with cell suspension. Do not touch or move the
electrodes with the pipette tip! This may cause damage.
During cell alignment/fusion, avoid direct contact with the electrodes!
3 Safety precautions
Multiporator_Text_en.fm Seite 49 Freitag, 9. Juni 2006 8:05 08