Eppendorf Multiporator - Manual (Page 14)

56
Setting the date
The procedure for setting the date and time can
be activated by pressing the SET and MODE keys
simultaneously. If the SET key is pressed again,
the underlining in the display for the date and time
moves from left to right. The arrow keys can thus
be used to modify the settings.
To end the process for setting the date, press the
SET key repeatedly until the underlining is no longer
visible in the display. Alternatively, the underlining
disappears from the display when the MODE or
START key is pressed.
(Note: The MODE key
switches to another mode if available.)
Setting the volume of the acoustic signals
The procedure for setting the volume of the acoustic
signals can be activated by pressing the MODE
and START keys simultaneously. "VOLUME" then
appears in the bottom line of the display, together
with a figure in percent. This figure indicates the
volume and the tone type and can be modified using
the arrow keys.
To end the procedure for setting the volume of the
acoustic signals, press the SET, MODE or START
key.
(Note: The MODE key switches to another
mode if available.) "VOLUME" then disappears from
the display.
Reset
An experiment can be terminated only by pressing
the main power switch. This switch also functions as
a reset switch.
4 Device description
Multiporator_Text_en.fm Seite 56 Freitag, 9. Juni 2006 8:05 08