Eppendorf Multiporator - Manual (Page 25)

67
When external electrodes are connected, the relevant national
safety regulations (relating to high voltage) and EMC
regulations apply and should be observed
(EMC: electro-magnetic compatibility).
The user is responsible for all equipment that has been
connected!
4.10 Printer connection / printer (optional)
The Multiporator

can supply a printer protocol for each experiment.
This protocol contains the parameters used as well as the date and time,
which are automatically retained. Additional data pertaining to the
experiment, such as buffer, concentration or cell line, can also be entered
by hand. In the event of an error occurring, the error message is also
printed out. Examples of printouts for different applications are shown
below:
18.Aug.00 16:03:04 eppendorf Multiporator 4308 V4.00
Higher Eucaryotic Cells U = 100 V,
τ
= 50 µs, n = 1
Cuvette Gap Width 1mm 2mm 4mm
Strain / Cell Line ______________________________
Cell Density ______________________________
Transfer Substance ______________________________
Concentration ______________________________
Buffer ______________________________
Temperature ______________________________
4 Device description
Multiporator_Text_en.fm Seite 67 Freitag, 9. Juni 2006 8:05 08