Eppendorf TransferMan4 r - Manual (Page 76)

76
Operation
TransferMan
® 4r
English (EN)
6.18.2 Execute Softkeys
1. Select the free softkey and confirm with Enter .
2. Select the desired parameter and confirm with Enter .
3. Close the menu.
• The selected parameter is assigned to the free softkey.
• The parameter appears on the application screen.
6.18.3 Execute Joystick key
Prerequisites
The My application application has been selected.
1. Select Joystick key and confirm with Enter .
2. Select the desired function and confirm with Enter .
3. Close the menu.
• The function is assigned to the joystick key.
• The selected function appears on the application screen.
6.19 Change appl. function
With this function you can define each application as the start screen or reactivate the
default screen.
6.19.1 Change appl. menu and parameters
Abb. 6-9:Menu –
Fig. 6-9: Menu – Change appl.
Parameter Value Range of values
Start display Reactivate start screen to select an application Execute
Application Define the selected application as the start screen Cell transfer
ICSI
DNA injection
Basic
My application