Eppendorf TransferMan4 r - Manual (Page 17)

17
Product description
TransferMan ® 4r
English (EN)
2.5.4 Direction of movement of the rotating wheel
The rotating wheel on the joystick moves the motor module in the vertical axis. This
activates the motor of the Z-module.
2.5.5 Joystick key functions
2.6 Working range
There are three working ranges within the movement range of the joystick. For each
working range, a radius with a resulting speed ratio is preset. The radius can be set using
the selection dial on the control board and in the
Speed menu.
Working ranges:
• coarse – for a large working range
• fine – for a medium working range
• x-fine – for a small working range
Abb. 2-9:Movement in the Z-axis
Fig. 2-9: Movement in the Z-axis

Move the capillary in the vertical
direction (Z-axis).
Abb. 2-10:No movement of the capillary
Fig. 2-10: No movement of the capillary

Uncouple the joystick from the motor
module.

Trigger functions (e.g., switch between
saved positions).