Advance Adapters AX15 - Manual (Page 52)

P/N 712544
52
P/N 715545 installed.
New external slave cylinder & hose (P/N 716340)
provided in the kit.
The following kits are designed for the Dana 300 transfer case. The “R” kit include a transmission and the “AA” kits are just the
adapters minus the transmission:
P/N 27-3530R - Dana 300 to NV3550 (Bellhousing adapter kit NOT included)
This kit includes: This kit includes: This kit includes: This kit includes: This kit includes: 26-3550R - NV3550 transmission(modified to fit the Dana 300)
716007-PLT - Transmission support adapter plate
716099 - NV3550 transmission shifter handle
P/N 27-3530AA - Dana 300 to NV3550 (Bellhousing adapter kit NOT included)
This kit includes: This kit includes: This kit includes: This kit includes: This kit includes: 50-8604 - Tranfer case adapter
716007-PLT - Transmission support adapter plate
716099 - NV3550 transmission shifter handle
P/N 27-3531R - NV3550 transmission retrofit (T5, T4, SR4, & T176)
This kit includes: This kit includes: This kit includes: This kit includes: This kit includes: 26-3550R - NV3550 transmission
712545 - Adapter plate NV3550 to Jeep bellhousing (must be a T150 or T176 bellhousing)
716007-PLT - Transmission support adapter plate
716099 - NV3550 transmission shifter handle
P/N 27-3531AA - NV3550 transmission retrofit (T5, T4, SR4, & T176)
This kit includes: This kit includes: This kit includes: This kit includes: This kit includes: 50-8604 - Tranfer case adapter
712545 - Adapter plate NV3550 to Jeep bellhousing (must be a T150 or T176 bellhousing)
716007-PLT - Transmission support adapter plate
716099 - NV3550 transmission shifter handle
Optional Bellhousing Adapters:
P/N 712591
- GM V6 & V8 to NV3550 (A 153 tooth flywheel is recommended when using this full bellhousing)
The clutch components are as follows: P/N CF360056 10-1/2” pressure plate, P/N 383271 10-1/2” clutch disc, P/N N1714
release bearing, and P/N 716213 slave cylinder. If a 168 tooth flywheel is used, a Hi-torque starter, P/N 22-0001 , must be
used as well as the following clutch components: P/N CF165552 11” pressure plate, P/N 383735 11” clutch disc, P/N
N1714 release bearing, and P/N 716213 slave cylinder.
P/N 712544
- Ford V8 to NV3550 (Adapter plate that bolts to a stock Ford bellhousing)
The stock bellhousing must be slightly modified for clearance on the NV3550 shift rod. This kit comes with a new 11” clutch disc
to fit the 1-1/8” 10 spline input shaft.